Jeep Cherokee Long Arm Upgrade

Fits 1987-2001

This is an upgrade only.  NO shocks, springs or accessories.

Provides a better ride then short arm lifts and GREAT flex off-road.

Comes with lower control arms, upper control arms,  Currie Johnny joints and poly bushings, and last but not least the transmission crossmember to hold everything to the frame.

Our lower control arms are made from 2x2 square tubing with a 1/4 inch thick wall.  They double as rock sliders and can take more abuse then any long arm kit on the market.

Welding is required during installation. 

Control arms carry a Lifetime Warranty against bending or breaking.

Rear Coil Conversion

Fits 1987-2001

Convert your rough riding, non-flexing leaf springs to coil springs using this kit.  Our kit has been heavily tested and abused!   With a double triangulated link set-up and fully adjustable anti-squat, you get a superior rear suspension. 

Factory Cherokee front coil springs in the rear will net a 6" lift.

Comes with rear crossmember, upper and lower control arms (1 poly bushing and 1 adjustable flex joint on each arm), axle brackets, axle truss, spring buckets and our unibody stiffeners with full frame wrap in the rear section. 

Our lower control arms are made from 2x2 square tubing with a 1/4 inch thick wall.  They double as rock sliders and can take more abuse then any long arm kit on the market.

Welding is required during installation.

Control arms carry a Lifetime Warranty against bending or breaking.

Optional double ended flex joints on control arms is available.

Jeep Cherokee Unibody Stiffener

Fits 1987-2001

This product is a great compliment to our long arm upgrade.

Provides rigidity to the weak unibody structure.  Make that cherokee of yours last through many years of abuse and strain off-road. Removes frame twist when flexing the suspension and enhances traction.

Unibody stiffeners by themselves can establish a sub-frame where there never has been one

Welding is required during installation.

Jeep Cherokee Front Winch Bumper

Fits 1984-2001

Super strong high clearance bumper. 

Sides have flats to use as jacking pionts.

Mounting takes advantage of an exsisting forth bolt location.

Incorperated D ring tabs on the front. 

D ring tabs can be shaved and a hook attachment point is added on the bumper mounting point.

Some winches require the grill to be trimmed.

Made from 1/4" and 3/16" plate. 

More Pictures

Jeep Cherokee Rear Bumper

Fits 1984-1996

Super strong rear bumper.

Sides have flats to use as jacking points.

Mounting uses 4 extra bolts along the frame rail.

Incorperated D ring tabs.

2" receiver.  Not tow rated.

Made from 3/16" tubing.

Jeep Cherokee Track Bar and Bracket

Fits 1984-2001

For a 5" or higher lift when a drop pitman arm is used.

This track bar and bracket fix all the bump steer issues related to a drop pitman arm.

Made from 1.375 DOM tubing.

3/4"x5/8" Rod end.

Uses an OEM replacment bushing for easy servicing.

                                                                  Bracket can be purchased seperatly.

More Pictures

Dana 30 Gusset Kit

Fits Dana 30 axles without dissconect.

This kit will allow you to use up to 35" tires and NOT bend you axle housing!

Made from 3/8", 5/16" and 3/16" plate steel.

These laser cut gussets fit perfectly and add strength to an otherwise weak axle.